ON/OFF Relay Switch 1x3,0kW FGS211

Radio controlled Fibaro On/Off Relay Switch is designed to be installed in standard wall switch boxes, or anywhere else where it is necessary to operate an electric device of 3,0kW power output. Fibaro On/Off Relay Switch can switch on or off connected device either through radio waves or through...

59.98

Double ON/OFF Relay Switch 2x1,5kW

4/5

on/off zwave relay switch...

59.98

Dual Paddle Wall Switch

3/5

The TZ66_D  dual wall switch is switching attached loads and is controlled either by the local switching paddle or remotely via the Z-Wave wireless protocol It is included and controlled in a Z-Wave network by a remote control, a wireless control centre or any other kind of Z-Wave contr...

43.56

Micro Smart Energy Switch (G2)

4/5

The Aeon Labs Smart Energy Switch Micro is a low-cost Z-Wave appliance switch specifically used to enable Z-Wave command and control (on/off) for existing in-wall switches. It can also report immediate wattage consumption or kWh energy usage over a period of time. The wireless module is powered f...

62.92

Lamp Holder 100W E27 Everspring

The module socket Everspring AN1452 can control a lamp remotely via Z-Wave commands. It installs quickly and easily between the lamp holder and bulb.   It can be controlled by a remote control, PC software, or any controller of your Z-Wave network.   Each module Z-Wave o...

39.93

Switch Set for Duwi Duro 2000

This pattress box insert of the manufacturer Duwi is intended to control all kinds of electrical loads. A 230V powered pattress box is needed for installation. The product consists of     •    the insert, which can be used with or without local control (equals ...

42.35

Switchers

Electrical switches and dimmers control electric loads in general and lamps in particular. Electrical switches typically switch all kind of loads but the application of dimmers is restricted to lamps. Depending on the dimmer method only resistive incandescent or a broader range of inductive and reactive loads are dimmable. When installing an electrical switch or dimmer the wiring system is important. There are 2-wire and 3-wire systems. In a 2-wire system the pattress box offers only the incoming and the outgoing wire. No neutral wire (blue) is available. In order to power the electronics of the switch or the dimmer a minimum load needs to be connected to the device. In the 3-wire system the neutral wire (blue) is available and connected to the device. The device is powered from the incoming wires regardless of attached loads. Switches or dimmers are either provided as pattress box insert without any local operation or they are wall switches with local switching paddles. In case of the manufacturer Popp the box insert can be completed with a switching paddle and a mounting frame and becomes a fully functional wall switch with local operations. Wall switches and wall dimmers typically receive Z-Wave commands and perform local switching and dimming. They are controlled by a Z-Wave controller and powered by the 230 V they are switching or dimming.

Double ON/OFF Relay Switch 2x1,5kW

Double ON/OFF Relay Switch 2x1,5kW

59.98

Radio controlled Fibaro Double On/Off Relay Switch is designed to be installed in standard wall s.....

Dual Paddle Wall Switch

Dual Paddle Wall Switch

43.56

The TZ66_D  dual wall switch is switching attached loads and is controlled either by the loc.....

Lamp Holder 100W E27 Everspring

Lamp Holder 100W E27 Everspring

39.93

The module socket Everspring AN1452 can control a lamp remotely via Z-Wave commands. It installs .....

Micro Smart Energy Switch (G2)

Micro Smart Energy Switch (G2)

62.92

The Aeon Labs Smart Energy Switch Micro is a low-cost Z-Wave appliance switch specifically used t.....

ON/OFF Relay Switch 1x3,0kW FGS211

ON/OFF Relay Switch 1x3,0kW FGS211

59.98

Radio controlled Fibaro On/Off Relay Switch is designed to be installed in standard wall switch b.....

Single Paddle Wall Switch

Single Paddle Wall Switch

41.14

The TZ66-S Single wall switch is switching attached loads and is controlled either by the local s.....

Switch Set for Duwi Duro 2000

Switch Set for Duwi Duro 2000

42.35

This pattress box insert of the manufacturer Duwi is intended to control all kinds of electrical .....

Switch Set for Duwi Everlux

Switch Set for Duwi Everlux

38.72

This pattress box insert of the manufacturer Duwi is intended to control all kinds of electrical .....

+

Z-Wave Spain

The On-line shop for home automation Z-Wave products. Based in Spain, we deliver all over the world. Z-Wave is the international standard for wireless networking of home control systems. You can manage lighting, electricity, blinds, alarms etc ... Z-Wave products from different vendors work well together allowing control of smart home.

Contact Us

Phone:
+34985791323
Mobile:
+34610266723
Email:
josemiguel.rubio@zwave.es
Skype:
josemiguel.rubiovaras

Twitter

    Facebook

    © Copyright 2012. Un producto de Domótica DaVinci.
    Desarrollado por