Micromodulo interruptor double Z-Wave+ FGS-223 - Fibaro

59.99

Sin Impuesto: € 49.58

Disponibilidad:
En Existencia
Código Producto:
ES-22-FIB_FGS-223
Marca:
Fibaro

Descripción

Especificaciones

Compatibilidad Controlador Principal
eeDomus+
Fibaro Home Center 2 v4.080 Full compatible
Fibaro Home Center Lite v.4.080 Full compatible
Zipabox/Zipamini/ZipaTile
Piper / Piper NV (v.1.7.1)
Indigo
jeedom
ZiHome
Tech Data
Explorer Frames - NWI Support Yes
SDK 6.51.06
App Version 3.2
Device Type On/Off Power Switch
Z-Wave Alliance Product Link http://products.z-wavealliance.org/products/1742
Procedimientos
Inclusión 1) Switch off the mains voltage (disable the fuse). 2) Place the Switch 2 within the direct range of your Z-Wave controller. 3) Connect the device in accordance with one of the diagrams attached in the manual. 4) After verifying correctness of the connection switch on the mains voltage. 5) Identify the S1 switch or the B-button (located on the device’s housing). 6) Set the main controller in (security/non-security) add mode (see the controller’s manual). 7) Quickly, three times press the S1 switch or the B-button. 8) Wait for the adding process to end. 9) Successful adding will be confirmed by the Z-Wave controller’s message.
Exclusión 1) Place the Switch 2 within the direct range of your Z-Wave controller. 2) Identify the S1 switch or the B-button (located on the device’s housing). 3) Set the main controller in remove mode (see the controller’s manual). 4) Quickly, three times press the S1 switch or the B-button. 5) Wait for the removing process to end. 6) Successful removing will be confirmed by the Z-Wave controller’s message.
Factory Reset Reset procedure allows to restore the device back to its factory settings, which means all information about the Z-Wave controller and user configuration will be deleted. In order to reset the device: 1) Switch off the mains voltage (disable the fuse). 2) Remove the Switch 2 from the wall switch box. 3) Switch on the mains voltage. 4) Press and hold the B-button to enter the menu. 5) Wait for the visual LED indicator to glow yellow. 6) Quickly release and click the B-button again. 7) After few seconds the device will be restarted, which is signalled with the red LED indicator colour. Use reset procedure only if the primary controller is missing or inoperable.
Wake-up (despertar) The FIBARO Double Switch 2 is powered with mains voltage so it is always awake.

Comentarios (1)

Escribir Opinión

Nota: No se permite HTML!

Malo            Bueno


Continuar

Z-Wave España

La tienda On-line para la comercialización de productos de domótica por Radio Z-Wave en España y toda Europa. Z-Wave es el estándar internacional para la interconexión inalámbrica de los sistemas de control de viviendas. Puede gestionar la iluminación, la electricidad, las persianas, las alarmas etc. Los productos Z-Wave de diferentes fabricantes trabajan bien juntos permitiendo el control de su hogar inteligente.

Contáctenos

Fijo:
+34985791323
Móvil:
+34610266723
E-mail:
josemiguel.rubio@zwave.es
skype:
josemiguel.rubiovaras

Twitter

Facebook